Outdoor Enclosure Wireless IP Spy Camera
This Outdoor Enclosure box includes
a Wireless IP Spy Camera hidden inside. The Outdoor Enclosure box is rain-proof. The Outdoor Enclosure Wireless IP Spy Camera comes with an AC Power plug by default. You can select an 11 hour, 22 hour, 30 day or 60 day battery. The 11 hour and 22 hour batteries run continuous power. The 30 day and 60 day batteries work by using a thermal body heat sensor.
Click to enlarge.The sensor can detect body heat
from 15 feet away. If nobody is
around it, the power will shut off and go into standby mode. If the
sensor is triggered continuously you may only get as little 11 hours
with the 30 day battery and 22 hours for the 60 day battery. The
batteries are rechargeable and can be used over and over many times.
The Outdoor Enclosure Wireless IP Spy Camera has the capability of recording and viewing live video from any computer in the world via your local network or through the Internet. Included is software that makes it easy to install the camera and configure the camera for your network. This software can be configured to watch and record up to 32 cameras remotely.
The Outdoor Enclosure Wireless IP Spy Camera connects to an ethernet or wireless network to enable remote high-quality video recording. 802.11g wireless technology allows you to place the device in places that were previously inaccessible such as walls. Support for the WPA® and WPA2® standard ensures that you will be provided with the highest level of security when connecting to your wireless network.
The Outdoor Enclosure Wireless IP Spy Camera is a versatile solution that connects to your wired or 802.11g wireless network to provide remote monitoring over the Internet. Schedule recorded video or snapshots to be uploaded to an FTP server or sent via e-mail.
Easily configure and manage your camera:
With the included software, you can manage up to 32 network cameras, set e-mail alert notifications, set recording schedules, and enable motion detection-triggered recording directly to a local hard drive. You can even upload a floor plan of your home or small business and create a realistic layout of where your cameras are located, providing you better access to your camera. Keep an eye out on your kids, pets, home, or office remotely by simply logging onto the camera using a Web browser from any computer with Internet access.
The SWIP-OE adheres to the Universal Plug & Play (UPnP™) specification, which allows for automatic camera detection and addition to networks. Once recognized by your network, the SWIP-SDA can be accessed and viewed from "My Network Places" as a device on your network. You can then stream the feed from the SWIP-OE to any compatible digital media player to view from the comfort of your living room.
With features such as MJPEG streaming and remote management, the Outdoor Enclosure Wireless IP Spy Camera (SWIP-OE) is a cost-effective and versatile security solution for your home or small business.
~ Camera is powered by the own power cord (12V DC).
~ The viewing angle is 70 degrees wide and 60 degrees tall.
~ There are no beeps, no lights, no noise and no sign that a camera is inside.
~ The video is easily playable on Windows Media Player or any other player (DivX, etc.) or through the internet. (DivX, etc.)
~ We have a support page on our website where we offer SECURE software downloads, answer common technical issues, installation information and general support.
~ Technical phone support is available during our normal business hours.
- Sensor: VGA ¼” CMOS
- Lens: 4.57mm, F1.9
- Minimum Illumination: 1.0 Lux @ F1.9
- 3A Control: AGC, AWB, AES
- Electronic Shutter: 1/60(1-50) ~ 1/15,000 Sec
- MPEG Compression
- JPEG for Still Images
- Up to 10fps at 640x480
- Up to 15fps at 320x240
- Up to 30fps at 160x120
- Wireless (802.11g)
- Wired (10/100 Fast Ethernet)
- IPv4, ARP, TCP, UDP, ICMP
- DHCP Client
- NTP Client
- DDNS Client
- SMTP Client
- FTP Client
- HTTP Server
- DNS Client
- IEEE 802.11g
- IEEE 802.11b
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x Flow Control
- Wireless: WPA®, WPA2®
- Default Admin ID/Password Admin
Minimum System Requirements
- External Power Supply: 5V, 2.5A
- Consumption: 4.5 Watts Max
- Wired (10/100 Fast Ethernet) or 802.11g Wireless Network
- Computer with a Pentium4 1.3 GHz Processor
- 128MB Memory
- Windows Vista®** and Windows® XP SP2
- Internet Explorer® v6 and later